-
STEP 12: Conveyor Roof
Continued ...
insuring that it was flush with the edge of the roof edge piece.
Once all of the cross pieces are in place, glue the other roof
edge piece flush with the cross pieces. Now cut a piece of
scale 2’ x 4’ to the length of the conveyor and glue it in the
center between the two roof edge pieces.
Once the roof for the large conveyor is complete, repeat the
same steps for the roof of the breaker. Cut the roof edge
pieces so that the roof of the breaker will extend slightly over
the roof of the conveyor.
The photo here (39) shows the completed breaker roof and
conveyor roof set in place. Next, paint both of these assem-
blies with the rust color used previously.
39: The completed breaker and conveyor roofs.
39
