-
STEP 14: Final Assembly
Continued ...
46: The receiving bin.
46
For the receiving bin, trim the styrene cross-braces on
the end piece of siding flush with the sides. Place a small
amount of two-part epoxy on the cross-braces and glue
the siding in place as shown in the photo here (46).
Next, glue the side pieces in place in the same manner as
the end piece. I placed two small wood blocks on the ends
of the sides in order to make sure that the siding was in
contact with the vertical supports.
Once the sides are finished, glue the roof in place.
