DT&I 50' Hydroframe - 3
STEP 1: Removing the factory lettering
Continued ...
2: The first step is to remove the Kadee factory
lettering. I apply Solvaset to a piece of tissue in order
to soften the factory lettering for around 5 min.
2
3: It is now easy to remove the factory lettering. I
wet-sand the lettering off using 400-grit wet-dry
sandpaper. Before I re-paint the car I first mask
off the ends and roof.
3
Build a laser kit prt 1 - 3
STEP 1: Removing the factory lettering
Continued ...
4: The prototype DT&I cars were built in the mid
sixties. Most prototype photos of these cars indicate
the paint weathered into a faded PC Jade Green. I
mix SC II White, CR Blue and a bit of BN Green and
airbrush the car.
4
MRH-Nov 2013
