55. MRH14-09-Sep2014-P - page 48

remove bumps and flash from the bottom of each piece. These
could cause rises in the track when it’s installed.
I put a piece of flex track on the roadbed where it will eventually
be glued down. Then I slip the Track Tool over the rails [10] and
apply a bit of twisting pressure while sliding it back and forth.
Easy does it here. I don’t try to force the track into final shape
all at once! With each pass I add a little more curvature, moving
from the end of piece of track toward the middle. When one end
is rough-curved to shape, I start at the other end.
Up the Creek Column - 6
7. Sanding gets rid of high spots and rough edges.
Sanding with a long sanding block reduces side-to-side
and up-and-down dipsy-doodles in the cork roadbed.
7
MRH-Sep 2014
1...,38,39,40,41,42,43,44,45,46,47 49,50,51,52,53,54,55,56,57,58,...307
Powered by FlippingBook