Natural Metal Finish - 5
13: Because the masking tape I use is not wide
enough to cover the entire car below the windows,
I add another strip of tape attached to a piece of
paper to cover the remainder of the car body. Now
is not the time for any errant over-spray.
There is no exact match for the Walthers gray
on the name board section of the car, so I mixed
my own. The mix, using PollyScale paints, is
approximately 75% Reefer Gray, 10% CSX Yellow,
5% SCL Caboose Orange, and 10% White Primer.
With the gray mixed, I sprayed the area of the name
board with it..
STEP 2: Repainting the car
Continued ...
13
MRH-Sep 2013
