STEP 2: Adding details
STEP 1: Preparing the car
Continued ...
Gunderson boxcar - 4
5. The prototype shot indicates these cars have
not six, but five panels on each side of the doors.
As long as I had to remove the lettering, I decided
to wet sand off the weld seams.
5
6. Remove the cast-
on weld seams using
400 and 600 grit wet-
dry paper.
6
7
7. Using the prototype photo as a guide, bend coupler
cut bars from .012” brass wire.
MRH-Jul 2014
