DCC Impulses column - 3
some cab repair was needed, too. Don’t be confused by the
different locos in the photos, ok?
You may want to contact George about machining your frame
before you start. Together you can work out details. Contact
him at
The locomotive disassembled and ready to start reassembly is
shown in figure 3. If you don’t feel confident building a locomo-
tive from this starting point, I suggest you don’t want to even
get started on this installation. Have a professional do it!
1.0 First steps
Before you can remove the shell, you need to get the couplers out.
4
4: Pry coupler loose from frame with a flat screwdriver.
MRH-Jan 2013
