way, and only use the front headlights. But you can use the
same technique for the front headlight and install a rear one
if you want.
Now it’s time to install the decoder. First, solder the motor
wires. The gray wire goes to the top motor brush; the orange to
the bottom. You can identify which is which because the contact
strip for the bottom brush wraps around the side of the motor.
N scale sound - 10
28
28. The decoder is taped to the frame.
29
29. The red and black wires are soldered to the small
piece of circuit board.
MRH-Dec 2014
