4
4. Here are both workbenches finished, side-by-side.
I used different hardware on them, since I was using
whatever I had on hand for the first one (left), and
purchased everything new for the second.
When closed, there is 2” of vertical clearance between
the top and bottom. That’s enough for some HO rolling
stock to sit upright, and pretty much anything to lie on
its side. It’s also enough room for most hobby paint
bottles and most freight car boxes, which make great
parts holders.
Portable workbench - 3
hinges, two barrel bolt latches, and one folding support. I
already had plenty of drywall screws on hand, but if you’re
buying them, you’ll need some at least 1½” long. I also chose
to varnish both workbenches to protect the wood and make it
a little prettier. Paint would also work well, though no finish is
needed for the workbench to serve its purpose.
MRH-Oct 2014
